Vacancy Sensor (Manual On Auto Off) Operation
- Passive Infrared Wall Switch Vacancy Sensor
- Rated: 120VAC, 60Hz, 0~600W
- Replaces a standard light or fan single-pole switch
- Works with incandescent, MLV, ELV, 1/6hp
- Works with fluorescent and CFLs (maximum 30Watts)
- Covers an area up to 24ft x 25ft (600ft²), 180º
- Requires a neutral line
- Adjusting time delay from 1 minute to 30 minutes
- Simple three wire + ground installation takes only minutes and no adjustments are required
- Conforms to California Title Code 24
- UL & CUL Listed
Parameters
- Voltage: 120VAC, 60Hz
- Coverage: 150° or 180°, max.600 sq. ft.
- Load requirements (single pole circuit):
- Incandescent or fluorescent light: 0-600 Watt
- Load Horsepower: 1/6 HP
- Time Delay Adjustment: 1 min to 30mins
- Operating Temp: 32° to 77°F (0°to 55°C)
- Operating Humidity range: 95% RH, non-condensing
